KPHP2211 | 21,240 BTU (1.8-ton) Heating | 17,700 BTU (1.5-ton) Cooling | 115V / 20 Amp | Single Phase

$3,986.50

List Price $5695.00

21,240 btuh (1.8-ton) Heating

17,700 btuh (1.5-ton) Cooling

Uses CK-24 Ceiling Kit to Exhaust Heat

 

WHY CHOOSE THIS UNIT

  • Super Small

  • Heats & Cools

  • Compact yet Powerful

Category:

Description

The Model KPHP2211 (nominal 1.5-ton or 17,700 BTU cooling and 21,240 or 1.8-ton Heating capacities) is the smallest unit possible in size and capacity in The PHP Portable Heatpump Series, KwiKool’s combined heating and air conditioning models. With its full-featured design, high sensible cooling and balanced air system, the KPHP2211 is the perfect solution for comfort cooling and heating applications. The PHP Series is quick and easy with its “plug and play” technology and tops the competition in its small size, big performance and tons of features. From its hi-tech microprocessor controls and self-diagnostics, to the long list of standard features the PHP Series out performs other portables and all at a price that is comparable to other available products. Unlike other heat pump brands, the KwiKool heat pump will operate all the way down to 45 degrees F.

All PHP Series units come standard with our exclusive I/O Integral Condenser Dual Ducting, which provides isolated and balanced air pressure within the space for maximum cooling efficiency. The KPHP2211 runs on a standard 115-volt/20-amp circuit with automatic restart after a power failure. The unit comes with an internal high lift condensate pump and a 5-gallon exterior condensate tank with float activated unit cut off for short term use.

**Image shown with flanges.

 

And, KwiKool products are proudly MADE IN AMERICA.

made-in-usa-badge

Heating Capacity

BTU/hr @ 55F at 60% RH – 21,240 (Nominal 1.8-Ton)

Cooling Capacity

BTU/hr @ 95F at 60% RH – 17,700 (Nominal 1.5-Ton)

Compressor Data

Compressor Type – Hermetic Rotary
Operating Heating Temperatures – 40-80 F 50% RH
Operating Cooling Temperatures – 60-110 F 50%RH
Refrigerant – 410A

Fan Data Evaporator

Fan Type (Centrifugal) – Direct Drive
Air Flow (CFM) – 600
Supply Air Device – Adjustable Vent
Supply Air Chute Kit (optional) – 2 – 6″ Dia. x 16″ Length

Fan Data Condenser

I/O Integral Condenser – Balanced Air Flow
Fan Type (Centrifugal) – Direct Drive
Air Flow (CFM) – 950
Condenser Duct Specs (optional) – 2 – 12″ Dia. x 8′ Length
Condenser Duct Max. Length – 25′

Electrical Data

Power Supply (Volts) – 115/Single Phase
Current Consumption Heating (Amps) – 16.2
Current Consumption Cooling (Amps) – 13.7
Power Consumption (kW) – 1.65
Maximum Circuit Breaker (Amps) – 30
Recommended Breaker Size (Amps) – 20
Minimum Circuit Ampacity (Amps) – 21.875
Min./Max. Voltage – 105-125
Power Cord Gauge/Length – 12/6′
Plug Configuration – NEMA 5-20

Dimensional Data

Width x Depth x Height (Inches) – 20.25″ x 41″ x 43.25″
Weight (Lbs.) – 278
Shipping Weight (Lbs.) – 328
Ceiling Kit Weight (Lbs.) – 38
Shipping Weight w/ Ceiling Kit – 366

Safety Device Data

Compressor Overload – Internal
Fan Motor Overload – Automatic Internal
Evaporator Freeze Protection – Hot Gas Bypass
High Pressure Switch – Manual
Low Pressure Switch – Automatic
Compressor Short Cycle – Yes
Automatic Restart – Yes
Thermostat Type – Microprocessor/Digital
Condensate Pump Overflow – Yes
Condensate Tank Overflow – Yes

Ceiling Kit | CK-12 | $295.00

The CK-12 is the ceiling kit for the Iceberg Series and includes two (2) 12″x8’ ducts, 2 flanges and fasteners to be mounted to the unit, clamps necessary for duct attachment and a ceiling panel with air deflector.

CK-12 Ceiling Kit Parts

Air Chute Kit | KDC-12 | $225.00

The KDC-12 is the Air Chute kit for the Iceberg Series and includes two (2)  5″ x 16″ flexible Chutes, an air housing with 5″ duct collars and clamps and necessary hardware to install your KDC to the the unit.

 

KDC-12 Air Chute Kit Parts   KDC-12 Air Chute Kit Assembled