The Model KIB6043 (nominal 5-ton or 60,000 BTU) is the smallest possible unit in size and capacity in The Iceberg Series, KwiKool’s Flagship Line of portables for both primary and backup air conditioning. With its full-featured design, high sensible cooling and balanced air system, the KIB6043 is the perfect solution for cooling server rooms. The Iceberg Series is quick and easy with its “plug and play” technology and tops the competition in its small size, big performance and tons of features. From its hi-tech microprocessor controls and self-diagnostics, to the long list of standard features (most of which are not even available in other brands), the Iceberg Series out performs, out lasts, and out features other portables and all at a price that is comparable to the no frills products that are available.
All Iceberg Series units come standard with our exclusive I/O Integral Condenser Dual Ducting that provides isolated and balanced air pressure within the space for maximum cooling efficiency. The condenser utilizes THD, KwiKool’s exclusive, Twin Hyperdrive Technology. The KIB6043 has automatic restart after power failure and runs on a 460-volt/20-amp Three-Phase circuit, which must be installed by a qualified electrician. The unit comes with an internal high lift condensate pump and a 5-gallon exterior condensate tank with float activated unit cut off for short term use.
And, KwiKool products are proudly MADE IN AMERICA.
BTU/hr @ 95F at 60% RH – 60,000 (5-ton)
Compressor Type – Hermetic Reciprocating
Operating Temperatures – 60-110 F 50%RH
Refrigerant – 407C
Fan Data Evaporator
Fan Type (Centrifugal) – Direct Drive
Air Flow (CFM) – 2000/3 Speed
Supply Air Device – Adjustable Vent
Supply Air Chute Kit (optional) – 2 – 10″ Dia. x 24″ Length
Fan Data Condenser
I/O Integral Condenser – Balanced Air Flow
Fan Type (Centrifugal) – Direct Drive
Air Flow (CFM) – 3500
Condenser Duct Specs (optional) – 2 – 18″ Dia. x 8′ Length
Condenser Duct Max. Length – 65′
Power Supply (Volts) – 460/Three Phase
Current Consumption (Amps) – 14.3
Power Consumption (kW) – 9.2
Maximum Circuit Breaker (Amps) – 20
Recommended Breaker Size (Amps) – 20
Minimum Circuit Ampacity (Amps) – 17.8
Min./Max. Voltage – 420-500
Power Cord Gauge/Length – 10 AWG/10′
Plug Configuration – Field Supplied
Width x Depth x Height (Inches) – 27.325″ x 51″ x 53″
Weight (Lbs.) – 537
Shipping Weight (Lbs.) – 587
Ceiling Kit Weight (Lbs.) – 56
Shipping Weight w/ Ceiling Kit – 643
Safety Device Data
Compressor Overload – Internal
Fan Motor Overload – Automatic Internal
Evaporator Freeze Protection – Hot Gas Bypass
High Pressure Switch – Manual
Low Pressure Switch – Automatic
Compressor Short Cycle – Yes
Automatic Restart – Yes
Thermostat Type – Microprocessor/Digital
Condensate Pump Overflow – Yes
Condensate Tank Overflow – Yes
Ceiling Kit | CK-60 | $495.00
The CK-60 is the ceiling kit for the Iceberg Series and includes two (2) 18″x 8’ ducts, 2 flanges with fasteners for mounting to the unit, clamps necessary for duct attachment and two (2) ceiling panels with one (1) air deflector. (Ceiling Kit shown on KIB3021)
Air Chute Kit | KDC-60 | $350.00
The KDC-60 is the Air Chute kit for the Iceberg Series and includes two (2) 10″ x 24″ flexible Chutes, an air housing with 10″ duct collars and clamps and necessary hardware to install your KDC to the the unit.
Condensate Tank | TANK15 | $225.00
The TANK15 is a 15 gallon condensate tank with a float assembly.
Flange/Collar | DCR-18" | $42.47
The DCR-18″ is a 18″ flange/collar.
Return Air Door | RA-24 | $350.00
The RA-60 is a Return Air Door with a 18″ Flange/Collar. This door can replace the Cold-Air Return door and used with ducting on the KIB models.
(picture shown is of RA-120 with a 20″ flange/collar)