KCW6043 | 60,000 BTU (5-ton) | 460V / 20 Amp | Three Phase

$8,116.00

List Price $10,995.00

60,000 btuh (5-ton)

 

WHY CHOOSE THIS UNIT

  • Compact yet Super Powerful

  • THD Technology (some models)

  • Direct Drive Blowers for Maintenance Free Use

Description

The Model KCW6043 (nominal 5-ton or 60,000 BTU) is the smallest water-cooled unit possible in size and capacity in The Ceiling Master Series, KwiKool’s Permanent Line of Above-Ceiling Mounted units. With its no frills features, high sensible cooling, and extremely small size, the KCW6043 is the perfect solution for cooling small server and IDF rooms, especially when floor space is limited. The Ceiling Master Series, KCW water-cooled models, perform and out last the competition with its small size, high efficiency, and lower cost.

The built-in mounting supports on the unit’s base allow for easy installation by a qualified mechanical contractor above a drop ceiling, using standard, off-the-shelf hardware. All Ceiling Master Series KCW water-cooled above-ceiling mounted units require access to a circulating water system, such as a chilled water system. Using tap water for water-cooled models is not recommended. The KCW models are equipped with a self-regulating internal water regulating valve, which is rated up to 150 psi. KwiKool’s self-contained design also eliminates the need for refrigerant connections, further reducing installation costs. All Ceiling Master Series KCW units come with two mounted flanges, which allow duct connection for the cold air supply and return. The KCW6043 runs on a standard 460-volt/20-amp three phase circuit and uses any 20-volt thermostat. The unit also comes with an internal high lift condensate pump.

And, KwiKool products are proudly MADE IN AMERICA.

made-in-usa-badge

Cooling Capacity

BTU/hr @ 95F at 60% RH – 60,000 (5-ton)

Compressor Data

Compressor Type – Hermetic Reciprocating
Operating Temperatures – 60-95 F 50%RH
Refrigerant – 407C

Fan Data - Evaporator

Fan Type (Centrifugal) – Direct Drive
Air Flow (CFM) – 2000
Cold Air Supply – 14″ Collar
Cold Air Return – 20″ Collar

Water Flow Data

Flow Control – Automatic Pressure Regulating Valve
Inlet Water 85F-95F Exit (GPM) – 15
Inlet Water 75F-95F Exit (GPM) – 7.5
Inlet Water 65F-95F Exit (GPM) – 5
Inlet Water 55F-95F Exit (GPM) – 3.75

Electrical Data

Power Supply (Volts) – 460/Three Phase
Current Consumption (Amps) – 10.4
Power Consumption (kW) – 7.5
Maximum Circuit Breaker (Amps) – 20
Recommended Breaker Size (Amps) – 20
Minimum Circuit Ampacity (Amps) – 13.4
Min./Max. Voltage – 420-500

Dimensional Data

Width x Depth x Height (Inches) – 24″ x 35.5″ x 25″ (without mounting feet)
Weight (Lbs.) – 385
Shipping Weight (Lbs.) – 435

Safety Device Data

Compressor Overload – Internal
Fan Motor Overload – Automatic Internal
Evaporator Freeze Protection – Hot Gas Bypass
High Pressure Switch – Manual
Low Pressure Switch – Automatic
Compressor Short Cycle – Yes
Automatic Restart – Yes
Thermostat Type – Customer Supplied
Condensate Pump Overflow – Yes
Internal Condensate Pump – Internal High Lift 20′ of Head
Fire Alarm Control Safety Shutoff – Yes
Alarm Output for Building Automation – Yes